Knowledge Base

Scenario

Step

Steps:
1. Download the TFTP tool and run it on the laptop.
2. Connect a laptop wired to NWA1121-NI , NWA1123-NI or NWA1123-AC. Configure a static IP address on the laptop's NIC card. The IP address is 192.168.1.222 and Subnet mask is 255.255.255.0.
3. Disable Windows Firewall before recovering.

4. Unzip the image file. For example "V100AAEOX.bin" for NWA1123-NI 、"V100AABJX.bin" for NWA1121-NI or "V100AAOXX.bin" for NWA1123-AC.
5. Unzip the image file. For example "V100AAEOX.bin" for NWA1123-NI 、"V100AABJX.bin" for NWA1121-NI or "V100AAOXX.bin" for NWA1123-AC again.
6. Copy two files "mi124_f1e-jffs2"," vmlinux_mi124_f1e.lzma.uImage" to the TFTP server folder.

 

7. Connect to NWA1121-NI through a serial port. Setup the serial port for the baud rate 115200, data 8 bit, parity none and stop 1 bit.
8. Power-on the NWA1121-NI , NWA1123-NI, or NWA1123-AC.
9. Press any key before the prompt counts down to zero.

************ Post Result *******************

POST memory PASSED

POST uart PASSED

POST ethernet PASSED

Hit any key to stop autoboot:  4

10. Setup the IP address.
>setenv ipaddr (AP IP address)

>setenv ipaddr (The laptop's static IP address)

11. Upgrade the kernel.
>run lk

12. Upgrade the filesystem.
>run lf

13. Reboot the device.
>reset

Verification

Login via the web GUI of NWA1121-NI, NWA1123-NI, and NWA1123-AC to check the firmware version.