Knowledge Base

What is the procedure to set up universal repeater on NWA1121-NI?

Question

What is the procedure to setup universal repeater on NWA1121-NI?

Answer

 

Topology Example :

 

1. Basic settings on NWA1121-NI

In Configuration -> Network -> LAN -> IP, change the IP Address to 192.168.1.3, set the Gateway IP address and Primary DNS server in order for time sync.

In Maintenance > Time > Time, enable NTP client update and select the NTP server you prefer or enter IP address of an NTP server.

 

 

 

2. Modify the Security and SSID profile.

 

 

Set Security mode to WPA2-PSK and set the pre-shared key to 12345678.

 

 

In Configuration >Wireless LAN > SSID, modify the Profile1. 

 

 

Set SSID to 1121 and select SecProfile1.

 

 

3. Change operation mode for Repeater AP.

In Configuration > Network > Wireless LAN > Wireless Settings, change operation mode to Repeater. Select profile1 for Universal Repeater SSID Profile and assign Root MAC address for this Repeater.

 

4. Change operation mode for Root AP

Take another AP, beside the IP Address, follow the task 1.1 to task 1.3 to complete the basic settings and profile modification.

 

 

Step 5: Verify the WDS link.

Verification on Root AP

In Monitor > Log > View Log, check the connect log.

 

 

In Monitor > Association List, check the connection status.

 

 

Repeater AP

In Dashboard, verify the WLAN connection status.



YES NO

Please leave your comment:

SUBMIT

Question Profile

LANGUAGE:
ARTICLE ID:013298
TYPE:General Info
FIRMWARE:1.00
VIEWS:8246
VOTES:4
TECHNOLOGY:
MODEL:NWA1121-NI

Still have trouble with your device? Contact Zyxel technology support team directly!

Contact Zyxel Support